TARGET EQUIPMENTS – WATER COOLED CHILLERS

TARGET EQUIPMENTS – WATER COOLED CHILLERS

Water-Cooled Chiller

The use of the cooling tower gives water-cooled systems an efficiency edge over air-cooled systems. Water cooled chillers circulate chilled water to air-handler units, where fans push air across heat exchanger coils to deliver cooling. Because they circulate water, which is more energy dense than air, water-cooled chillers can offer a more efficient and effective cooling option.

Application

Water-cooled chillers are most commonly used in buildings larger than 200,000 square feet, where the cooling load is large enough for increased efficiency gains to offset the higher equipment cost. However, they’re also a viable choice in smaller buildings with more than two stories because they don’t have to push air through ducts across multiple stories. Potential applications for water-cooled chillers include multi-storey structures, universities, large office buildings, and hospitals.

Advantage of Target Equipments Water cooled chiller

The advantage of choosing Target Equipment’s water cooled chillers is the structure and quality that succeeds it. Besides, the performance is also a thumbs-up for setting up our product proudly into your industrial premises. The compact design was done keeping in mind the floor area and installation surrounding. The materials and functioning grants the plus point of low cost preventive maintenance and greater term of serviceability. 

Specifications

Specifying an efficient water cooled chiller system can be a challenging process. Many parameters affecting system efficiency and performance need to be considered.

  • Chiller efficiency
  • Full-load versus part-load chiller operation
  • Constant-speed compressors
  • Auxiliary component efficiency (pumps and fans)
  • Operating strategies
  • Interactions between components and operating strategies
  • Power source
  • Chiller rating
  • Ambient temperature
  • Area of application
  • Material of structure
  • Noise level
  • Refrigerant
  • Cooling capacity
  • Installation area

How to choose correct chiller?

Which type of chiller to choose for a specific application is determined largely by the cooling capacity required and the trade-off between initial costs and operating costs. In general, for conditions that require less than 300 tons of cooling capacity, chillers with screw or scroll compressors are common. Screw chillers dominate the upper end of this capacity range, but magnetic-bearing compressors are gaining ground as they enable variable frequency operation, which hasn’t been a readily available option in the past in this size range. For requirements of more than 300 tons of cooling capacity, chillers with centrifugal compressors are typically used.

Moreover, keeping in mind the environment and resources, the choice and input strategy may vary as for the choice of the type of the chiller like air or oil or water cooled chillers. Apart from these central chillers, decentralised chillers and portable chillers are also out in the market which eases the usage procedures.

TARGET EQUIPMENTS – AIR COOLED CHILLERS

TARGET EQUIPMENTS – AIR COOLED CHILLERS

AIR COOLED CHILLERS

http://targetequipments.com/industrial_chiller_manufacturers_india.htmlTarget equipment air cooled chillers are the best in terms of quality and capacity of cooling and are basically manufactured for outdoor functioning. Air cooled chillers are made such as they absorb heat from processed water and then transfer the heat to the air around the chiller unit. All it uses is ambient air that kicks out the hardship of using water supply for cooling. The ambient air is mechanically circulated with the help of series necessary components through the condenser unit to get rid of the developed heat from the source to the atmosphere. Therefore it is very beneficial for the industries and functional areas where water supply is a problem. It reduces the cost of operation as the complex structure and non corrosive protective measures are not to be taken as it is done in water cooled chillers. Moreover, where the water is priced rather heavily priced, air cooled chillers are the top priority.

Advantages of Target Equipments air cooled chillers

The advantage of choosing Target Equipment’s air cooled chillers is the structure and quality that succeeds it. Besides, the performance is also a thumbs-up for setting up our product proudly into your industrial premises. The compact design was done keeping in mind the floor area and installation surrounding. The materials and functioning grants the plus point of low cost preventive maintenance and greater term of serviceability. 

  • Compact design
  • Low maintenance cost
  • Long life
  • Less initial and operation cost
  • Better efficiency or cooling rate

Specifications

  • Power source
  • Chiller rating
  • Ambient temperature
  • Area of application
  • Material of structure
  • Noise level
  • refrigerant
  • Cooling capacity
  • Installation area

Energy Savings

    • Designed to provide the greatest amount of cooling for the least kilowatt input over the entire operating range of your building.
    • Delivers outstanding efficiency and total energy savings through the utilization of economizer cycle and fewer compressors.
    • Maximized performance through computer matched components and multiple compressors on separate refrigerant circuits.
    • High efficiency oil recovery system guarantees removal of oil carried over in the refrigerant and maintains the heat exchangers at their maximum efficiency at both full and part load.

Installation Ease

    • Units are air cooled and therefore require no tower make up water or water treatment.
    • Units have optional single point power connection and multiple disconnects to reduce installation costs.
    • Dramatic payback in reduced maintenance and overhaul costs both in down time and in labour expenditures.
    • Ease of troubleshooting through automatic and manual monitored functions.
    • Factory run tested.