All posts by Target Equipments

TARGET EQUIPMENTS – WATER COOLED CHILLERS

TARGET EQUIPMENTS – WATER COOLED CHILLERS

Water-Cooled Chiller

The use of the cooling tower gives water-cooled systems an efficiency edge over air-cooled systems. Water cooled chillers circulate chilled water to air-handler units, where fans push air across heat exchanger coils to deliver cooling. Because they circulate water, which is more energy dense than air, water-cooled chillers can offer a more efficient and effective cooling option.

Application

Water-cooled chillers are most commonly used in buildings larger than 200,000 square feet, where the cooling load is large enough for increased efficiency gains to offset the higher equipment cost. However, they’re also a viable choice in smaller buildings with more than two stories because they don’t have to push air through ducts across multiple stories. Potential applications for water-cooled chillers include multi-storey structures, universities, large office buildings, and hospitals.

Advantage of Target Equipments Water cooled chiller

The advantage of choosing Target Equipment’s water cooled chillers is the structure and quality that succeeds it. Besides, the performance is also a thumbs-up for setting up our product proudly into your industrial premises. The compact design was done keeping in mind the floor area and installation surrounding. The materials and functioning grants the plus point of low cost preventive maintenance and greater term of serviceability. 

Specifications

Specifying an efficient water cooled chiller system can be a challenging process. Many parameters affecting system efficiency and performance need to be considered.

  • Chiller efficiency
  • Full-load versus part-load chiller operation
  • Constant-speed compressors
  • Auxiliary component efficiency (pumps and fans)
  • Operating strategies
  • Interactions between components and operating strategies
  • Power source
  • Chiller rating
  • Ambient temperature
  • Area of application
  • Material of structure
  • Noise level
  • Refrigerant
  • Cooling capacity
  • Installation area

How to choose correct chiller?

Which type of chiller to choose for a specific application is determined largely by the cooling capacity required and the trade-off between initial costs and operating costs. In general, for conditions that require less than 300 tons of cooling capacity, chillers with screw or scroll compressors are common. Screw chillers dominate the upper end of this capacity range, but magnetic-bearing compressors are gaining ground as they enable variable frequency operation, which hasn’t been a readily available option in the past in this size range. For requirements of more than 300 tons of cooling capacity, chillers with centrifugal compressors are typically used.

Moreover, keeping in mind the environment and resources, the choice and input strategy may vary as for the choice of the type of the chiller like air or oil or water cooled chillers. Apart from these central chillers, decentralised chillers and portable chillers are also out in the market which eases the usage procedures.

TARGET EQUIPMENTS – AIR COOLED CHILLERS

TARGET EQUIPMENTS – AIR COOLED CHILLERS

AIR COOLED CHILLERS

http://targetequipments.com/industrial_chiller_manufacturers_india.htmlTarget equipment air cooled chillers are the best in terms of quality and capacity of cooling and are basically manufactured for outdoor functioning. Air cooled chillers are made such as they absorb heat from processed water and then transfer the heat to the air around the chiller unit. All it uses is ambient air that kicks out the hardship of using water supply for cooling. The ambient air is mechanically circulated with the help of series necessary components through the condenser unit to get rid of the developed heat from the source to the atmosphere. Therefore it is very beneficial for the industries and functional areas where water supply is a problem. It reduces the cost of operation as the complex structure and non corrosive protective measures are not to be taken as it is done in water cooled chillers. Moreover, where the water is priced rather heavily priced, air cooled chillers are the top priority.

Advantages of Target Equipments air cooled chillers

The advantage of choosing Target Equipment’s air cooled chillers is the structure and quality that succeeds it. Besides, the performance is also a thumbs-up for setting up our product proudly into your industrial premises. The compact design was done keeping in mind the floor area and installation surrounding. The materials and functioning grants the plus point of low cost preventive maintenance and greater term of serviceability. 

  • Compact design
  • Low maintenance cost
  • Long life
  • Less initial and operation cost
  • Better efficiency or cooling rate

Specifications

  • Power source
  • Chiller rating
  • Ambient temperature
  • Area of application
  • Material of structure
  • Noise level
  • refrigerant
  • Cooling capacity
  • Installation area

Energy Savings

    • Designed to provide the greatest amount of cooling for the least kilowatt input over the entire operating range of your building.
    • Delivers outstanding efficiency and total energy savings through the utilization of economizer cycle and fewer compressors.
    • Maximized performance through computer matched components and multiple compressors on separate refrigerant circuits.
    • High efficiency oil recovery system guarantees removal of oil carried over in the refrigerant and maintains the heat exchangers at their maximum efficiency at both full and part load.

Installation Ease

    • Units are air cooled and therefore require no tower make up water or water treatment.
    • Units have optional single point power connection and multiple disconnects to reduce installation costs.
    • Dramatic payback in reduced maintenance and overhaul costs both in down time and in labour expenditures.
    • Ease of troubleshooting through automatic and manual monitored functions.
    • Factory run tested.

AIR COOLED CHILLERS

TARGET EQUIPMENT’S – AIR COOLED CHILLERS

AIR COOLED CHILLERS

Target equipment air cooled chillers are the best in terms of quality and capacity of cooling and are basically manufactured for outdoor functioning. Air cooled chillers are made such as they absorb heat from processed water and then transfer the heat to the air around the chiller unit. All it uses is ambient air that kicks out the hardship of using water supply for cooling. The ambient air is mechanically circulated with the help of series necessary components through the condenser unit to get rid of the developed heat from the source to the atmosphere. Therefore it is very beneficial for the industries and functional areas where water supply is a problem. It reduces the cost of operation as the complex structure and non corrosive protective measures are not to be taken as it is done in water cooled chillers. Moreover, where the water is priced rather heavily priced, air cooled chillers are the top priority.

 

Advantages of Target Equipment’s air cooled chillers

The advantage of choosing Target Equipment’s air cooled chillers is the structure and quality that succeeds it. Besides, the performance is also a thumbs-up for setting up our product proudly into your industrial premises. The compact design was done keeping in mind the floor area and installation surrounding. The materials and functioning grants the plus point of low cost preventive maintenance and greater term of serviceability.

  • Compact design
  • Low maintenance cost
  • Long life
  • Less initial and operation cost
  • Better efficiency or cooling rate

Specifications

  • Power source
  • Chiller rating
  • Ambient temperature
  • Area of application
  • Material of structure
  • Noise level
  • refrigerant
  • Cooling capacity
  • Installation area

Energy Savings

  • Designed to provide the greatest amount of cooling for the least kilowatt input over the entire operating range of your building.
  • Delivers outstanding efficiency and total energy savings through the utilization of economizer cycle and fewer compressors.
  • Maximized performance through computer matched components and multiple compressors on separate refrigerant circuits.
  • High efficiency oil recovery system guarantees removal of oil carried over in the refrigerant and maintains the heat exchangers at their maximum efficiency at both full and part load.

Installation Ease

  • Units are air cooled and therefore require no tower make up water or water treatment.
  • Units have optional single point power connection and multiple disconnects to reduce installation costs.
  • Dramatic payback in reduced maintenance and overhaul costs both in down time and in labour expenditures.
  • Ease of troubleshooting through automatic and manual monitored functions.
  • Factory run tested.

 

Chilling Product Exporter – Chilliers Manufacturers

How Target Equipments is helping in ‘Make in India’ program?

Target Equipments is one of the leading manufacturers of industrial cooling towers and other advanced cooling equipments as well as spares in India. It is the place where quality meets requirement on or before the target, hence the name goes, Target Equipments. We have a successful record of satisfied customers and long lasting equipments with greater efficiency in affordable costs and are constantly upgrading our levels in terms of quality, rankings and skilled personnel.

Make in India and Target Equipments

Our honourable Prime Minister Mr. Narendra Modi gave a vital gift to the country in the form of ‘Make in India’. This program and initiative has boosted the confidence of all the sectors and segments in our country, especially manufacturing units like ours. The main aim of this program is encouragement of domestic companies to manufacture more in country in order to increase the GDP and create more and more jobs for youth.

By enhanced technology and better manufacturing techniques, we’re not only improving our work force but also hiring new labours and making them skilled enough to take up the work confidently. Updating them about the recent techs in manufacturing and showing them way of betterment by assessments of output and efficiency forms our major objective when it comes to the working environment in our place.

Our contribution in India and Abroad

We try our level best to give 120 percent to meet the market demands and are ready for challenges that boost our competency in real world. With the advent of ‘Make in India’ program, we also took a major step in developing our manufacturing units for high scale yield with optimized standards of quality. Besides, Target Equipments has also been successfully conquering the reach of customers outside India by quality exports of cooling towers with different flow types and best wooden towers. So far we are spread in UAE, Oman, Saudi Arabia, Europe, Africa, South America and North America delivering high quality industrial chillers, cooling systems, heat exchangers, chemical tank etc. moreover, our spares have also been widely preferred by industries and renowned brands for setting their equipments right and needy in affordable cost.

Make in india Cooling Towers – Chilliers

Why choose Target Equipments?
When Target Equipments was established in 2001, we had a sole objective of gaining the top spot in the belt of industries delivering one of the best cooling methods around the globe and to make it true we grew out to manufacture best industrial chillers- air cooled and water cooled, cooling towers – round shaped and square shaped, cross flow and axial flow cooling towers, wooden cooling towers etc, heat exchangers and other ‘must’ equipments for industries. Our constant success in manufacturing line speaks well about our services and quality that we offer to the clients.
Here’s a look on why you should chose Target Equipments over others.
1. Cooling Technology
Keeping in mind the rising demand for the ‘local’ manufacturer or better called ‘home’ manufacturers of industrial equipments we flagged off our vision Target Equipments in a positive direction to give it a boost of technology. Here, at Target Equipments we use advanced technology in manufacturing the world class cooling towers, heat exchangers, chemical tanks etc that keeps our quality notch higher than our competitors and satisfaction to customers.
2. Quality
Faster manufacturing rates and good quality often bonds as a challenge for variety of companies and industries everywhere because of the uncertainty of peak periods that invites in flow of demands and requirements but we achieved this feat with the constant dedication towards our goal. Our clients have shown faith in us by praising our efforts to deliver the flawless and superior quality products and maintaining the same since our first day of work.
3. Modern trends (Make in India)
Ever since the program of Make in India started, we added one big responsibility in our bag of goals i.e. to help our country grow on larger scale. Our efforts doubled and we made necessary changes in our work force hiring more individuals and expanding our units in order to be a renowned brand in manufacturing arena. We understood that now we were more flexible and vulnerable as well in our field. French to Urdu . So we started to walk on path of Make in India in manufacturing field by generating employment, training unskilled labours, increase quality and boost in export network.
4. Experience and Approach
We at target equipments cease to believe that more number of years gives more experience. We, from the very first day believed in our products and standards, no matter what factors prevail. The skilled personnel in our company with or without experience has taught us that the method of approach pays for long period. Our confidence in our manufacturing methods made us one of the best manufacturers of cooling equipments in India within a short period of time.
5. Leading Exporter
Our products not only impressed the Indian industries but also the best industries from countries like UAE, north America, South America, Europe, Africa, Saudi Arabia, Latin America especially Brazil, Venezuela, Chile, Columbia, Bahamas, Argentina, Trinidad and Ecuador, along with Caribbean country side and Mexico and south Asia like Sri Lanka . With this big list of clients, we feel highly proud and fortunate to have faithful customers that gave us a chance to prove our worth in the world of manufacturing.

CHILLERS

water_cooled_chiller_01

CHILLERS
You have spent a great deal of time pondering over the choice of chiller, air cooled or water cooled? Many couldn’t be that confident to go straight to the manufacturer and state the requirements and this is because we miss to analyze the plus and minus of these two equipment’s from our point of view and available resources. So here we, at Target Equipment’s have given the guide which will help you to choose the best chiller as per your need.

Water cooled chillers are voted as the most efficient ones in processing heat but they require a large amount of water. Though, when compared to air cooled chillers, water cooled ones have greater amount of net power enhancement as per its applications. English to Japanese So, if you have plenty of available water, cheap or free, water cooled chillers are the best.

Air cooled chillers do not consume water and this is their major advantage. However, they are voted as less efficient than water cooled chillers because they consume a lot of energy to dissipate heat through air medium. This is the reason why air cooled chillers have less value of net power enhancement, specifically for gas turbine. Also, air cooled ones comes as secondary choice as the cost of process is higher.

In Terms of storage  again we prefer water cooled chillers over air cooled ones as the former can be installed indoor but the later has to installed only outdoors. This gives a good monitoring convenience for water cooled chillers. But sometimes more precautions are needed to be taken in the surrounding of heavy electrical units.

One of the major factors that impact the decision is the location. There isn’t any point of installing a water cooled chiller in a place that is prone to drought and receives less rainfall for a period of time. In this situation, air cooled ones find a comfortable place in your equipment list.

For the area which is connected to rivers and receives moderate or high rainfall, both water and air cooled chillers can be installed but water cooled chiller finds a cheaper spot in your list.

Lastly, the places where conservation of water is a priority and have strict water discharge regulations, we prefer to use air cooled chillers.

PERFORMANCE OF THE COOLING TOWER

NATURAL-COOLING-TOWER-PERFORMANCE

PERFORMANCE OF THE COOLING TOWER. ARE YOU FORTUNATE OR CHEATED?
Did you ever feel fortunate that your cooling tower’s performance was more than the designed value? Or felt cheated by your manufacturers the cooling was less than what it promised?
If you did, then you’ve been knowing the concept of its operation all wrong!
Sounds surprising? Yes! There’s always a misconception on this topic and here is the reason why your cooling tower does so.
The cooling tower uses the principle of evaporation and diffusion as the heat from the source is removed by the contact of the working fluid (water) with the air. At this point, some amount of water evaporates and it also takes away the latent heat from the rest of the fluid. To be exact, the temperature dips much lower than the Dry Bulb Temperature (temperature of air as measured by thermometer).
An easy calculation to determine the cooling rate would be a simple mathematics of temperature of hot water minus temperature of the cold water. But this isn’t the correct way to determine the cooling capability or the performance of any cooling tower. There’s an expression for the heat load:
*Heat Load [Btu/hr] = 500 x Water Flow Rate [GPM] x Range [oF]
(1 kW = 3412.142 btu/hr)
(1 GPM = 0.227 m3/hr)
Here heat load refers to the heat source or the system for which a cooling tower is assigned. So, the tower is neither a heat sink nor a heat source. So heat load is obviously independent of the cooling tower. The main point here is that even the water flow rate is independent of the tower as it is determined by the pressure drop and the number of pumps engaged for the supply. So, if all the parameters are independent, there would not be any effect on Range temperature, no matter what type of cooling tower we use.
Therefore, the thermal capability of a cooling tower can never be calculated on terms of the amount of heat rejected or evaporated.That is, when the heat rejected is less by any maintenance factor, you’ll be taking it as if you are cheated by the manufacturer and when due to more heat rejection, you’ll feel fortunate as the tower range of cooling will be more than the designed value! (By the formula, Performance = hot water temp. – cold water temp)
Then how is it calculated exactly?
The performance of the tower is best calculated by the level at which the heat is rejected i.e. the temperature of the cold water at the time of the circulation, just before it comes in contact with the heat load.
*[Source: Jalal Engineering, oshuja@cyber.net.pk]

FRP cooling towers

Square Shape Cooling Tower 200 TR

 FRP cooling towers

We are one of the leading manufacturers and exporters and supplier of quality FRP cooling towers that are offered in both counter flow and axial flow cooling tower models.
The FRP cooling towers are widely used in air conditioning plant, induction furnaces/sheet rolling mills and factory, chilling plant/refrigeration,
diesel generator set/turbines, injection molding machine/plastic industries, automobile industries and mechanical industries and forging industries.
These cooling towers are manufactured using high grade material that makes them corrosion resistant, and helps in resisting water borne bacteria and organisms.
This is light in weight, which permits roof installation with special reinforcement of any kind. www.firstnationalcc.com .

America, Especially Brazil, Venezuela, Chile, Argentina, Bahamas, Colombia, Panama Republic, Peru,

Target Equipments is now involved in exporting engineering items like HVAC Equipments ,industrial chillers, industrial cooling towers, heat exchangers ,RO Plant, evaporator cooling systems, centralized Air conditions, air coolers, kitchen equipments, forging components, Frp Tank and more..
We are engaging to exports in developing nations such us Latin America, Especially Brazil, Venezuela, Chile, Argentina, Bahamas, Colombia, Panama Republic, Peru, Trinidad and Ecuador are amongst India’s top ten trading partners and Mexico and Caribbean countryside. nolin recc .

WHY CHOOSE EVAPORATIVE COOLING SYSTEM

WHY CHOOSE EVAPORATIVE COOLING SYSTEM?
Today, there are number of cooling systems and cooling methods in market and choosing any one suitable system to suit your requirement is little tough. You always need to analyse certain factors based on location, climate, type of workload and so on. But there arises a question that out of all which method promises efficiency and sustainability that too in an economic way? The answer always remains the same i.e. evaporative cooling.
Evaporative cooler is also called swamp cooler in many countries and it is the type of cooling system that uses water and a blower to cool the air and circulate it continuously at the time of use. The basic principle of an evaporative cooler is that warm, dry (unsaturated) air is pulled through a water soaked pad that evaporates the water which is further absorbed by the air as water vapour. The air is cooled in the process and the humidity is increased.
So why you should still go for evaporative cooling system?